Stainless Steel Louvered Vent - Oval - 9-1/8" x 4-5/8" Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant...

Stainless Steel Microphone Clip This one-piece Microphone Clip secures your microphone close to your radio. Fits all standard microphones for hailers, VHF, or CB radios. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two RH fasteners (not included). WARNING: This product can...

Stainless Steel Midget Vent - Medium Midget Vents provide a splash-proof opening through transoms, cabin sides, etc. Great for routing cables and wires or for covering thru-hull openings to shield water spray. Ideal for small lockers, they provide attractive cover for ventilation holes while also...

Stainless Steel Midget Vent - Small Midget Vents provide a splash-proof opening through transoms, cabin sides, etc. Great for routing cables and wires or for covering thru-hull openings to shield water spray. Ideal for small lockers, they provide attractive cover for ventilation holes while also...

Stainless Steel Open Base Cleat - 8"The Open Base Cleats provide easy line tie-off and corrosion resistance in a classic style. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four FH thru-bolts (not included).WARNING: This product can expose you to chemicals...

Stainless Steel Pulpit Flagpole The corrosion resistant formed 304 stainless Pulpit Flagpole fits 7/8" or 1" tubing. Each flagpole comes complete with split rings for easy flag attachment and has a polyethylene spacer to reduce scratching of the rail. Maximum speed 10 MPH. Fasteners included....

Stainless Steel Rail Mount Flagpole - 30" The Sea-Dog® Rail Mount Flagpole is constructed of stainless steel with a UV resistant injection molded nylon rail mount bracket and split rings for easy flag attachment. Maximum speed 10 MPH. WARNING: This product can expose you to...

Stainless Steel Release Pin 1/4” x 1-1/2”Standard-duty detent release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. These quick-release pins are activated by a push or pull motion. The detent ball depresses and springs up...

Stainless Steel Replacement Flag Pole - 30" The flag is attached to the flagpole using nylon adjustable flagpole clips in conjunction with stainless steel, spring wire, quick release clips which allows mounting flexibility for a variety of flag or pennant sizes.  Maximum speed 10 MPH.WARNING:...

Stainless Steel Replacement Flag Pole - 17" The flag is attached to the flagpole using nylon adjustable flagpole clips in conjunction with stainless steel, spring wire, quick release clips which allows mounting flexibility for a variety of flag or pennant sizes. For use on either...

Stainless Steel Round Louvered Vent - 5" Round Louvered Vents allow air in while keeping water out. Installs with four #6 FH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. Vent area 5” 2.02 in2.WARNING: This product can expose you to chemicals which...

Stainless Steel Short Side Door Hinge - Stamped #8 Screws Individual Bulk PackagingThese Short Side Door Hinges are great for interior and exterior applications such as cabinets, hatches, folding tables, or seats where mounting space is tight. Constructed of corrosion resistant stamped 304 stainless...

Stainless Steel Short Side Door Hinge - Stamped PackagedThese Short Side Door Hinges are great for interior and exterior applications such as cabinets, hatches, folding tables, or seats where mounting space is tight. Constructed of corrosion resistant stamped 304 stainless steel. Installs with five...

Stainless Steel Side Mount LED Navigation Lights - 2 NM - Port & Starboard LED Side Mount Side Lights 400079 are approved for USCG 2 NM (Colreg 2 mile). Constructed of corrosion resistant stamped 304 stainless steel. One pair includes port and starboard lights. Surface...

Stainless Steel Side Mount Removable Rod Holder Side Mount Rod Holder slides in and out of mounting plate for a lower profile while not in use. Constructed of formed 316 stainless steel with mounting plate. Features a 30° angle. Accommodates rods up to 1-13/16”. Installs...

Stainless Steel Skene Chocks - 4-1/2"These Skene Chocks provide a smooth lead for your mooring or dock lines minimizing chafing. The tips of these chocks are designed to overlap, preventing the motion of the boat from causing the line to accidentally work free of...

Stainless Steel Stern Light 135° Stern Light is constructed of stamped 304 stainless steel. For replacement of existing lighting (not for new construction). Installs with three #4 RH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment...

Stainless Steel Stud Mount Handrail - 12" The Stud Mounted Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance and durability. Designed to provide a sleek, smooth handrail transition to...

Stainless Steel Stud Mount Handrail - 24" The Stud Mounted Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance and durability. Designed to provide a sleek, smooth handrail transition to...

Stainless Steel Stud Mount Handrail - 6" The Stud Mounted Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance and durability. Designed to provide a sleek, smooth handrail transition to...

Stainless Steel Surface Mount Handrail - 12" Constructed of corrosion resistant formed 304 stainless steel. These Surface Mount Hand Rails install easily with two 5/16" FH fasteners (not included). Locate a hand rail quickly and conveniently wherever needed. 1” OD tubing for a comfortable grip....

Stainless Steel Surface Mount Handrail - 18" Constructed of corrosion resistant formed 304 stainless steel. These Surface Mount Hand Rails install easily with two 5/16" FH fasteners (not included). Locate a hand rail quickly and conveniently wherever needed. 1” OD tubing for a comfortable grip.WARNING:...

Stainless Steel Surface Mount Handrail - 24" Constructed of corrosion resistant formed 304 stainless steel. These Surface Mount Hand Rails install easily with two 5/16" FH fasteners (not included). Locate a hand rail quickly and conveniently wherever needed. 1” OD tubing for a comfortable grip.WARNING:...

Stainless Steel T-Hinge - 4"A T-Hinge is a hybrid combination between a butt and strap hinge. The horizontal part of the T goes on the frame, while the vertical part is fastened to the door or cabinet and is visible when closed. This highly...

Stainless Steel/Nylon Hatch SpringThis strong Hatch Spring has an internal cable that prevents the spring from being overextended during normal use. Ideal for larger hatches and dock boxes. Constructed of corrosion resistant formed 304 stainless steel with heavy duty molded nylon mounting pads on...

Stainless Top Cap - 7/8"Top Fittings connect to tubing as a Top Cap or Top Insert for 3/4” or 7/8” round tubing or 1” square tubing. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top...

Stainless Top Insert - 7/8"Top Fittings connect to tubing as a Top Cap or Top Insert for 3/4” or 7/8” round tubing or 1” square tubing. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top...

Steering Cable Boot Durable molded rubber boot protects the output end of all standard steering cables keeping dirt, debris and moisture out extending the service life of the cable. Includes two cable tie style clamps. WARNING: This product can expose you to chemicals which are...

Stern Eye - 3/8" x 3-1/2" - Machined 304 Stainless SteelThese Stern Eyes are for use as a tie-down point on your boat’s stern. Robust backing plates for added rigidity. 3/8" and 7/16" shafts have rolled threads. 1/2" stock has cut threads. Constructed of...

Storage Rack - 3 Rod Constructed of injection molded polypropylene. These Rod Storage Racks feature soft foam inserts securing rods and reducing potential damage from rough seas. Installs with four #8 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known...

Surface Mount Locking Ring Pull - Stamped 304 Stainless Steel/Die Cast Zinc LockThis Surface Mount Locking Ring Pull is recessed for a flush, clean installation. Includes two locking arms for flush or offset installations. Ideal for hatches, deck plates, cabinets, and drawers. Designed to...

T-Handle Locking Compression Latch Investment cast 316 stainless steel construction for corrosion resistance and durability. This latch features a T-handle to engage the offset locking arm. Handle is recessed for a flush, clean installation. Locking feature for secure hatches. Includes heavy duty stainless key. Requires...

Telescopic Paddle with Double Boat Hook Boat Hook Paddle has grab hole in paddle for hand and handle has double hook. Boat Hook Paddle telescopes to six feet.WARNING: This product can expose you to chemicals which are known to the State of California to cause...

Textured Quarter Turn Deck Plate - Black - 6" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. Easy to open and close. A specially engineered lubricated gasket is used...

Textured Quarter Turn Deck Plate - Black - 8" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. Easy to open and close. A specially engineered lubricated gasket is used...

Textured Quarter Turn Deck Plate - White - 5" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. Easy to open and close. A specially engineered lubricated gasket is used...

Textured Quarter Turn Deck Plate - White - 6" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. Easy to open and close. A specially engineered lubricated gasket is used...

Textured Quarter Turn Deck Plate - White - 8" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. Easy to open and close. A specially engineered lubricated gasket is used...

Thermal AC/DC Circuit Breaker - 10 AmpThermal AC/DC Circuit Breakers are designed to protect an electrical circuit from damage caused by excess current. Vibration and shock resistant these push-to-reset circuit breakers are an economical alternative to magnetic breakers. Unlike sacrificial fuses they have the...

Thermal AC/DC Circuit Breaker - 15 AmpThermal AC/DC Circuit Breakers are designed to protect an electrical circuit from damage caused by excess current. Vibration and shock resistant these push-to-reset circuit breakers are an economical alternative to magnetic breakers. Unlike sacrificial fuses they have the...

Thermal AC/DC Circuit Breaker - 20 AmpThermal AC/DC Circuit Breakers are designed to protect an electrical circuit from damage caused by excess current. Vibration and shock resistant these push-to-reset circuit breakers are an economical alternative to magnetic breakers. Unlike sacrificial fuses they have the...

Thermal AC/DC Circuit Breaker - 8 AmpThermal AC/DC Circuit Breakers are designed to protect an electrical circuit from damage caused by excess current. Vibration and shock resistant these push-to-reset circuit breakers are an economical alternative to magnetic breakers. Unlike sacrificial fuses they have the...

Track Rod Holder - 7" Tracks - 4 Rod Clips These Track Rod Holders are designed to hold fishing rods in the toughest conditions. Can be mounted vertically or horizontally in boats and homes. Includes two 7” pre-drilled aluminum tracks and four PVC clips. Mounting...

Triple Lock Rectangular Marine Hatch - 10" x 14" - BlackThis Triple Latch Marine Deck Hatch features 3 locking points which when engaged cause the camming surface to pull the lid into the gasket creating a water tight seal. Constructed of injection molded polypropylene...

Triple Lock Rectangular Marine Hatch - 10" x 14" - WhiteThis Triple Latch Marine Deck Hatch features 3 locking points which when engaged cause the camming surface to pull the lid into the gasket creating a water tight seal. Constructed of injection molded polypropylene...

Triple Threat™ Rod Holder - Surface MountThe Triple Threat™ Rod Holder is the one-stop for all reel styles. Spin, bait cast, or fly reel—this rod holder can handle it all!Features: The quarter turn knob allows for easy adjusting of the angle of the rod...

Triple Threat™ Rod Holder - Track MountThe Triple Threat™ Rod Holder is the one-stop shop for all reel styles. Spin, bait cast, or fly reel—this rod holder can handle it all!This is a TRACK MOUNT Triple Threat™ Rod Holder.Features: The quarter-turn knob allows for...

Triple Threat™ Rod Holder - Track Mount Base with 6" ExtensionThe Triple Threat™ Rod Holder is the one-stop shop for all reel styles. Spin, bait cast, or fly reel—this rod holder can handle it all!This TRACK MOUNT Triple Threat™ Rod Holder has a 6...

Triple Threat™ Rod Holder Track Mount - Base OnlyThe Triple Threat™ Rod Holder is the one-stop for all reel styles. Spin, bait cast, or fly reel—this rod holder can handle it all!This is a TRACK MOUNT BASE ONLY for the Triple Threat™ Rod Holder.Features:...

Triple Threat Three Pole Rod Holder - BlackThe Triple Threat™ Three Pole Rod Holder is made in the USA with recycled materials. Features the ability to hold bait, cast, and fly-fishing rods/reels. This three-pole, side-mount rod holders come equipped with a built-in knife and...