DPDT Contura Switch - 1-Amber LED - ON/OFF/(ON)Double pole, double throw switch turns two of four circuits on at a time. Common applications include intermittent and maintained windshield wiper control. Contura switches are rated to IP66, high-pressure wash resistant. Recommended for replacements in waterproof...

DPDT Contura Switch - 2-Amber LEDs - ON/OFF/ONDouble pole, double throw switch turns two of four circuits on at a time. Common applications combining nav lights and anchor light with independent bulbs, maintained single windshield wiper control. Contura switches are rated to IP66, high-pressure...

DPDT Rocker Switch - 12V/24V - (ON)/OFF/(ON)Double pole, double throw switch turns two of four circuits on at a time.Features: Nominal voltage is 12V DC Rated for 25A at 12V DC Six 1/4" blade terminals Snap-in mounting to fit panel hole 1.45" x .83"...

DPDT Rocker Switch - 12V/24V - ON/OFF/ONDouble pole, double throw switch turns two of four circuits on at a time.Features: Nominal voltage is 12V DC Rated for 25A at 12V DC Six 1/4" blade terminals Snap-in mounting to fit panel hole 1.45" x .83"...

DPDT Toggle Switch - ON/OFF/ONDouble pole, double throw toggle switch turns two of four circuits on at the same time.Standard black nylon handleFeatures: Nominal voltage is 12V DC Rated for 25A at 12V DC Six 1/4" blade terminals Mounting stem 15/32" fits panels up...

DPST Contura Switch - 1-Amber LED - OFF/ONDouble pole, single throw switch turns two circuits on at the same time. Common applications include simultaneous control of anchor and running lights. Contura switches are rated to IP66, high-pressure wash resistant. Recommended for replacements in waterproof...

Dual Distribution Stud Module - 2 x 3/8"The 702-2S was designed specifically for transom areas for connecting battery cables from outboards. It also has many other applications where heavy duty positive and negative connections need to be terminated.WARNING: This product can expose you to...

Dual Operation VSS Switch HD Optic - 12/24V - 500AThis Voltage Sensitive Switch (VSS) automatically senses connected battery bank voltage and provides optimal, efficient charging of the second bank.  The VSS allows for independent battery banks to be combined or isolated based on the...

Easy Fit Battery Switch - 275A ContinuousThe Easyfit Battery Switch was created for installations where switches need to be recessed through varying thicknesses of panels. It achieves this through an easily removable threaded ring that allows for panel thicknesses up to 3/4" (19 mm)....

Electronic Dimmer Switch w/Wire Leads - 7A @ 12V DCControls incandescent light intensity from dim to bright. Not meant for LED lights.Features: Nominal voltage is 12V DC Rated for 7A at 12V DC 2" 16 AWG wire lead terminals 7/16" mounting hole, fits panels...

Emergency Parallel Battery Knob, Yellow Easy FitThis battery knob option for 701 Switches is for applications where emergency parallel switch needs to be highlighted. Order separately Replaces existing knob WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to...

Emergency Parallel Switch - 12/24V - 275A This Motorized Switch offers remotely activated, high current, emergency parallel connection suitable for emergency starting of large engines (up to 2500A for 10 seconds).  The emergency parallel functionality is conveniently operated via a momentary button on the dash,...

Emergency Parallel Switch  - 12/24V - 500AThis Motorized Switch offers remotely activated, high current, emergency parallel connection suitable for emergency starting of large engines (up to 2500A for 10 seconds).  The emergency parallel functionality is conveniently operated via a momentary button on the dash,...

Heavy Duty CB Module, 80A705 Contour Circuit Breaker HD allows switchable protection for heavy duty circuits like Windlasses or Davit winches utilizing Bussmann Heavy Duty thermal circuit breakers. Allows switchable protection for heavy duty circuits like windlasses or davit winches Modular sizing with contour...

Heavy-Duty Battery Switch - 600A ContinuousFeatures: The 720 Heavy-duty Battery Switch is well suited to larger vessels, being capable of handling the high electrical loads found on today's boats and RV's plus starting large diesel engines Rated at 600A continuous and 2500A cranking Can...

Horizontal Battery Distribution Cluster f/Single Engine w/Two Battery BanksThe 716-H-140A-DVSR is an ideal replacement for a battery selector switch. Just remove the selector switch and connect the existing wires to a 716 cluster, no extra wires are required for a fully automatic battery management...

Illuminated SPST Rocker Switch - Red LED - 12V - OFF/ONSingle pole, single throw switch turns one circuit on and off.Features: Nominal voltage of 12V DC Rated for 10A at 12V DC Switches snap-in mounting holes .55" x 1.13", fits panels .02" to .25"...

Kill Switch & LanyardAdd safety to older boats easily. In an emergency, a quick pull on the lanyard stops the engine, preventing accidental runaway. Includes switch, lanyard, and disconnect clip. Contact engine manufacturer for specific installation instructions.Features: Nominal voltage is 12V/24V DC Rated for...

Kill Switch Replacement LanyardReplacement lanyard and disconnect clipWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Pilot Indicator Light - 12V - BlueThese 12V DC solid-state LED diodes never need replacement. The amber colored light provides easy to see indication of circuits that are active.Features: Bright chrome-plated body, bezel, washer and hexnut Quick connect terminals are polarized for ease...

LED Pilot Indicator Light - 12V - GreenThese 12V DC solid-state LED diodes never need replacement. The amber colored light provides easy to see indication of circuits that are active.Features: Bright chrome-plated body, bezel, washer and hexnut Quick connect terminals are polarized for ease...

LED Pilot Indicator Light - 12V - RedThese 12V DC solid-state LED diodes never need replacement. The amber colored light provides easy to see indication of circuits that are active.Features: Bright chrome-plated body, bezel, washer and hexnut Quick connect terminals are polarized for ease...

Lever-Operated Master Disconnect - ON/OFFThis single pole, single throw switch turns one circuit on and off.Features: Nominal Voltage is 6-36V DC with 175A continuous and 800A intermittent ratings Has 3/8" brass terminal studs Includes face plate which indicates position of the M284 switch 3/4"...

Mini Battery Selector SwitchThe 701S is the most compact selector switch available on the market. While BEP recommends isolated battery systems as outlined with our distribution clusters, the 701S provides a simple economical way of separating two batteries. BEP Marine Battery Switch Test Procedures...

Multi-Purpose Alarm - 12VFeatures: A convenient way to add alarm functionality to your dash or panel Buzzer sounds and bright red light illuminates when voltage is present For use with temperature, oil pressure, and engine warning alarm kits Nominal voltage is 12V DC #8-32...

Panel-Mounted Battery Master SwitchPanel-mounted switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution. Compact, lightweight Removable key Countersunk recesses for surface mount application Standard 2-1/16" (52 mm) hole cut out (same as standard gauge hole) Inside: captive...

Panel-Mounted Battery Mini Selector SwitchPanel-mounted switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution. Compact, lightweight Countersunk recesses for surface mount application Standard 2-1/16" (52 mm) hole cut out (same as standard gauge hole) Inside: captive inserts...

Piezo Buzzer, 30mm 5-30V 85DBEspecially suitable for use with the new 701-MDCZ CZone optimized motorized battery switch, this piezo buzzer is also useful wherever a single tone alarm is required. 85 decibel output at 9 Volts Frequency 3.5KHz Voltage 5-30 Volts Power consumption 9mA...

Piezo Buzzer, 42mm 5-20V 97DBEspecially suitable for use with the new 701-MDCZ CZone optimized motorized battery switch, this piezo buzzer is also useful wherever a loud single tone alarm is required. 97 decibel output at 9 Volts Frequency 2.8 KHz Voltage 5-20 Volts (Suitable...

Bus Bar HD 3 Stud 650A MC5Pro Installer buss bars are designed for flexibility and scalability. The snap-out side skirts allow for additional cable entry, and radius ends improve cable routing options. it is easy to link other Pro Installer products to the buss...

500A 4 Stud Buss barPro Installer buss bars are designed for flexibility and scalability. The snap-out side skirts allow for additional cable entry, and radius ends improve cable routing options. it is easy to link other Pro Installer products to the buss bars because...

Pro Installer 400A Double Pole Battery Switch - MC10A powerful new generation battery switch with outstanding performance and features for both the installer and end user. Three mounting options: surface, rear panel, and front panel mounting, plus optimized cable access makes installation a breeze....

Pro Installer 400A EZ-Mount Battery Selector Switch (1-2-Both-Off)As easy as 1, 2, 3, these revolutionary battery switches allow you to wire from the front. Never has installation been so easy and cabling so accessible. With their shared interconnection height, EZ-Mount battery switches "cluster" directly...

Pro Installer 400A EZ-Mount Double Pole Battery Switch - MC10An addition to our multi award winning Pro Installer EZ Mount range, this battery switch provides Double Pole On/Off functionality so that both positive and negative battery terminals can be isolated. Most commonly used on...

Pro Installer 400A EZ-Mount Dual Bank Control Battery Switch - MC10Another addition to our multi award winning Pro Installer EZ Mount range, the innovative Dual Bank Control switch is like 3 switches in one, House, Start, and Emergency Parallel. Offering easy intuitive control for...

Pro Installer 400A EZ-Mount On/Off Battery Switch - MC10As easy as 1, 2, 3, these revolutionary battery switches allow you to wire from the front. Never has installation been so easy and cabling so accessible. With their shared interconnection height, EZ-Mount battery switches "cluster"...

Pro Installer 400A Selector Battery Switch - MC10Power requirements on boats have increased, and these 2 Selector switches offer high power capacity (400 amps continuous), the ability to easily fit doubled cables, and conform to the industry standard mounting footprint (Guest, Perko, Blue Sea)....

Busbar HD 5 Stud 650A MC5Pro Installer buss bars are designed for flexibility and scalability. The snap-out side skirts allow for additional cable entry, and radius ends improve cable routing options. it is easy to link other Pro Installer products to the buss bars...

Busbar HD 8 Stud 650APro Installer buss bars are designed for flexibility and scalability. The snap-out side skirts allow for additional cable entry, and radius ends improve cable routing options. it is easy to link other Pro Installer products to the buss bars because...

Fuse Holder ANL 300AProviding high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers. They also protect...

ANL Fuse Holder with 2 Additional Studs, 750AProviding high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters and battery...

ANL Through Panel Fuse Holder, 500AThis innovative, through-panel mounting fuse holder (Patent Pending) offers the user easy visual inspection of fuse state, and easy/safe access to change fuses if blown. It provides high-capacity fusing, fast response, high interrupt ratings (up to 3,000 Amps DC),...

Bus Bar - 6 Way/100A with 2 Input Studs (with Red and Black)BEP bus bars include tin-plated, brass-insulated mounting bases and flame-resistant flexible plastic covers. The covers are color-coded for polarity and feature a unique push-on fit. Bus Type: Single Output screws: 6 Input...

Class T Fuse Holder with 2 Additional Studs 225-400A Providing high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters...

Class T Fuse Holder with 2 Additional Studs 450-600AProviding high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters and...

10mm Double Instulated StudThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts allow for additional cable entry. Saves space...

Double Insulated Stud 8mmThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts allow for additional cable entry. Saves space...

Insulated Distribution Stud, Dual 1/4" - (Black)Dual Stud Made with high temperature plastic bases Stud covers push securely over the threaded stud covering to ABYC standards Dual studs ideal for +ve / -ve connections, branch circuits, windlass or inverter installations Covers supplied with display...

Pro Installer Insulated Stud - Single - 10mmThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts allow for additional...

Insulated Stud Single 8mmThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts allow for additional cable entry. Saves space...