90° P-Trap Fuel Tank Vent -  Black with Black Vent HeadThis Attwood 90-Degree P-Trap Fuel Tank Vent reliably helps prevent water from entering the fuel tank while still allowing air to vent freely during normal sea conditions and washdowns. This vent’s effectiveness eliminates the...

Deck Fill for Pressure Relief Systems - Straight Body & Scalloped Stainless Steel CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release...

Deck Fill for Pressure Relief Systems - Angled Body & Scalloped Stainless Steel CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release...

Motor Well Boot for 4 (inch) Diameter OpeningThe motor well boot provides an organized, covered pass-thru for control cables, wires, or fuel lines. The split side allows for installation without disconnecting controls.Features: Sold as a single pack that contains two Motor Well Boots Includes...

Portable Fuel Tank Cap with Tether - EPA CertifiedHigh-flow valve exceeds OEM engine fuel flow requirements. Be sure your fuel system is safe; the ratchet feature ensures a proper seal while the tether prevents cap loss. Very versatile; designed for 0 to 350 horsepower...

Deck Fill Replacement Cap & ChainThis Attwood Replacement Cap and Chain is made for Attwood deck fills. The flush cap is slotted for a separate key and features an O-ring that seals the cap watertight. Features:Cap is attached by a stainless steel beaded chainSpecifications (Cap...

Portable Fuel Tank - 3 Gallon with GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 3-gallon tank is perfect for small outboards. Includes gauge.Features:  3 Gallon fuel capacity Compatible...

Portable Fuel Tank - 12 Gallon without GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed.Features:  12...

Portable Fuel Tank - 12 Gallon with GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed. Includes...

Mooring Fender Lock Kit - Stainless Steel PairStainless Steel Fender Lock Kit 11575-3 makes hanging or moving fenders quick and easy. The two-part kit is easy to install with stainless steel screws or bolts (not included). Tie fenders to the key part of the...

Letter & Number Kit - WhiteFeatures: 3-inch, waterproof vinyl, pressure-sensitive labels Resists fuel, fading, and scratches Kit contains (White Pieces): Four of each letter and number, plus twelve dashes totaling 148 pieces *Meets USCG guidelines Quick Guide (pdf)

Submersible Trailer Light KitApplicable to trailers under 80 inches wide. Ideal for utility, snowmobile, camping, motorcycle, and boat trailers. Design conforms to applicable US FMVSS and Canadian CMVSS safety standards.Complete Kit Includes: A pair of 8-function stop/tail/turn lights, wiring harness, and license plate bracket Specifications:...

Low-Profile Submersible Trailer Light KitLow profile for trailers over 80 inches wide. Ideal replacement lights for most boat trailers. Conforms to applicable U.S. FMVSS and Canadian CMVSS safety standards. Kit Includes: (2) multi-function lamps  Wiring harness  License plate bracket and mounting hardware Specifications: LED: No...

1200 lb Single Drive Winch - 2" x 20' Nylon StrapSolid gear construction with precise gear tooth engagement. 1,200-lb. load capacity with 4.1:1 gear ratio. Three position pawl provides forward, neutral, and reverse operations. Features: Black EDC finish  Molded, textured roller grip  Includes 20 ft....

2000 lb Dual Drive Winch - 2" x 20' Nylon StrapDual drive enhances the pulling capacity by distributing the load equally to two sets of gears. Eliminates frame torque. 2,000-lb. load capacity with 4.1:1 gear ratio. Features: Three-position pawl provides forward, neutral, and reverse operations ...

Fold-Up Trailer Jack - 1000 lb Capacity - Single WheelFits 3 inch x 5 inch tongue and swings up and out of the way. Swing-up jack has a convenient sidewind handle and a tough 6 inch diameter polypropylene wheel.Features:Corrosion-resistant, zinc-plated steel tubingSpecifications: Travel lift...

Trailer Bunk Padding 12" x 12'12 ft. long roll of durable, weather-resistant polypropylene marine carpet material. Easy to cut and custom fit. Features: 12 inches wide Protects hull  Eases loading and launching  Charcoal color Acrylic backing grips the surface of trailer bunk boards or cradle ...

Quick-Release Transom Tie-Down Straps 2" x 4' PairWhen properly secured to transom eyes and trailer, transom straps reduce vertical and lateral movement to safely secure the boat to the trailer. They also reduce the bouncing of the boat on the trailer pads or rollers....

Quick-Release Gunwale Strap 2" x 13'Gunwale straps secure the entire aft section of the boat over the gunwale to the trailer and restrict vertical movement while on the road. Specifications:2 inches wide13 ft. longWebbing:  Strong webbing Resists rot, oils, gasoline, and most chemicals Buckle:  Quick-Release...

HubMate Wheel Bearing ProtectorsHubMate™ bearing protectors replace the dust caps in the wheel hub. The accessible grease fitting allows you to add grease without disassembling it. Positive grease pressure keeps water and dirt out. Features: Outer hub inner diameter: 1.78 inches Automatically lubricates, reducing wear...

Launch Line 5/16" x 30'Helps assist or steer your boat when launching or loading.Features: Solid braid MFP line includes spring hook and handy foam grip Easy to handle floatable line that dries quickly UV Resistant Specifications: Thickness (inch): 5/16" Length (feet): 30' Color: Blue...

Swivl-Eze Adjustable Pedestal 11-1/2" - 17-1/2"Features: Adjustable Range (inch): 11-1/2" - 17-1/2" Exceptional durability Reinforced Black powder coated for a long-lasting finish Quick Guide (pdf)

Swivl-Eze Low Back Padded Flip Seat - GreyThis seat features a high-impact plastic frame and aluminum hinges. It is UV and mildew resistant with easy-to-clean vinyl and a standard seat hole mounting pattern. Specifications: Dimensions (inch): 15" Wide x 16" depth x 16" height Color:...

Deck Fills for Pressure Relief Systems - Straight Body - Scalloped Black Plastic CapAttwood's Pressure Relief Systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to...

Springlift Black Composite - 10mm Socket - Extended 26.9" - Compressed 15.2"Attwood is partnered with Stabilus®, the world’s leading supplier of gas springs and related products with over 100,000,000 units in the field. All Attwood springs are made with biodegradable, no-hazard water-grade oil (WGK)....

Tsunami Mk2 T500 Aerator - 12V - Straight InletKeep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.Features: 3-1/2 in. x...

Tsunami Mk2 T800 Aerator - 12V - 90-Degree InletKeep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.Features: 3-1/2" x 3/4"...

Tsunami Mk2 T1200 Aerator - 12V - 90-Degree InletKeep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.Features: 3-1/2" x 1-1/8"...

Swivl-Eze Seat Swivel 7" Black with 3° TiltSwivl-Eze has the boating experience to deliver all the kinds of accessories you want.Features: 360° ball-bearing seat swivel (requires weight or pressure to turn) 5-1/4" universal mounting hole pattern Tilt Angle: 0° Black powder coat finish

2-In-1 Non-Adjustable Rod Holders *2-PackThese two rod holders have a fixed vertical angle to optimize rod positioning and a smaller size is perfect for medium and light action gear. Features: Rod throat opening fits most standard and ultra-light rods up to 1-3/16 inches in diameter ...

Heavy-Duty Adjustable Rod Holder with Combo Mount - White This rod holder is designed for use with baitcasting and spinning reels.Features: An ergonomic design and easy-to-find rapid-release latch Large, easy-grip lock-nut that offers an easy 180-degree vertical adjustment range for a variety of rod tip...

Sure-Grip Stainless Steel Rod Holder - 4" & 5-Degree AngleAttwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated...

Heavy-Duty Battery Tray - 29/31 Battery SeriesThis heavy-duty Attwood battery tray is for a group 29 or group 31 battery and is made of non-corrosive black plastic.Features: Includes an adjustable-height crossbar and stainless steel retaining bolts Meets ABYC Standard E-10 and U.S. Coast Guard...

Group 24 Battery Tray with StrapsA simple-to-install battery holder that fits into limited spaces. This tray is for batteries up to 10-1/2 inches in height. Provide a simple installation for changing or replacing batteries.Features: The polypropylene hold-down strap has a positive-locking, quick-disconnect buckle Molded...

Group 27 Battery Tray with StrapsA simple-to-install battery holder that fits into limited spaces. This tray is for batteries up to 10-1/2 inches in height. Provide a simple installation for changing or replacing batteries.Features: The polypropylene hold-down strap has a positive-locking, quick-disconnect buckle Molded...

29/31 Battery Tray with StrapsA simple-to-install battery holder that fits into limited spaces. This tray is for batteries up to 10-1/2 inches in height. Provide a simple installation for changing or replacing batteries.Features: The polypropylene hold-down strap has a positive-locking, quick-disconnect buckle Molded base...

Low Profile Group 24 Adjustable Battery TrayThis battery tray is made of heavy-duty, non-corrosive black plastic. The tray includes an adjustable-height crossbar and two retaining bolts.Features: Meets ABYC Standard E-10 and U.S. Coast Guard requirements Patented design Install with #10 fasteners Specifications: Battery Series:...

Service Kit for S1200 Bilge PumpsSpecifications: Outlet Diameter: 1" (25mm) & 1-1/8" (28mm) Compatible with Tsunami Bilge Mk2 Kit includes (1 each): 90-degree outlet Straight outlet Washer Non-return/check valve WARNING: This product can expose you to chemicals which are known to the State of...

Transducer Mounting PlateFeatures: Marine-grade polymer plate will not warp or corrode Premium materials; unaffected by UV rays Mounts easily with only 2 screws All hardware included Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 3"W x 12"L WT: 1 lbs UPC: 022697941107

Alternator 250 AMP Kit 12V 3.15" Dual Foot Saddle J10 Pulley Regulator & Temp SensorKit Includes: XT-DF-250-J10 Alternator, MC-618 Regulator, Temperature Sensors & Mounting HardwareXT Series Alternator: 250A, 12V, Saddle Mount (Dual Foot), 3.15in, J10 AltMount Serpentine Pulley, Case GroundHitachi-Style Mounting; Typical for Yanmar,...

White Plastic 90 Degree Thru-Hull Connector - 1-1/8" Inner Diameter90° Thru-Hulls are ideal for tight installations, such as livewell overflow drains. The angled design also eliminates hose kinking.Specifications: Fits Hose Size: (inch) 1-1/8"inner diameter Max Hull Thickness: (inch) 1-7/8" Flange Diameter: (inch) 2-7/16" Installation...

Yamaha Tank Fitting - 1/4" NPT ThreadConnect your tank and fuel lines with confidence. Solid machined brass construction holds up to lead, unleaded, and alcohol-based fuels. Designed for Yamaha Brand engines and tanks and fits select Mercury/Mariner Brand engines.Features: Quick-connect 1/4-inch male thread makes...

Yamaha Female Hose Fitting - Tank Or Engine End - 5/16" BarbThis Attwood hose fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. Barbed fitting fits 5/16" I.D. (Inner Diameter) hose and clamps are not included. Also, use thread sealant on...

95 Series Alternator Pully, Altmount®AltMount® Serpentine PulleyTen-Groove (J10) Serpentine Pulley for 95-Series Alternators2.7″ Diameter, 0.875″ BoreThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Pulley Kit for Yanmar 6LY, 6LYA-STP, 6LY2-STPAltMount® Serpentine Pulley Conversion Kit for Yanmar Diesel EnginesYanmar Engines Covered: 6LY, 6LYA-STP, 6LY2-STPKit Includes: Three Ten-Groove (J10) Pulleys, Two J10, 55″ Circumference Serpentine Belts (one spare) & Mounting HardwareNote:  If you specify an AT-200A Alternator, a longer...

ZAMAK Chrome Plated Zinc Cleats - Pair - 4-1/2"For decades, Attwood has set marine industry standards for great looking, durable, freshwater hardware. Our Perma-Plate® process provides the best chrome-plating in the industry with eight individual layers of plating. Each layer adds to the product’s...

Yamaha Fuel Line Kit 6' x 3/8"Attwood's low-permeation fuel line kits set the standard in performance, safety, and value. Along with featuring Attwood's award-winning Universal Sprayless Connector, these kits meet strict United States EPA regulations. Attwood Corporation has been an award-winning leader in engineering,...

Alternator 150 AMP 12V 4" Dual Foot Saddle K6 Pulley with Isolated GroundAlternator, 604 Series, 150A, 12V, Saddle Mount (Dual Foot), 4in, K6 Serpentine Pulley, Isolated Ground 4" J-180-Style Mounting;  Typical for Caterpillar, Cummins, Detroit Diesel & John Deere Engines.Replaces: 604-150-SR-IGThis product may not...

Offshore Repair Kit AT Series 200AMP 12V Includes Bearings, Brushes, RectifierOffshore Repair Kit, AT Series Alternators, 12V, 200AIncludes: Bearings, Brushes, RectifierThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

White Plastic 90 Degree Thru-Hull Connector - 3/4" Inner Diameter90° Thru-Hulls are ideal for tight installations, such as livewell overflow drains. The angled design also eliminates hose kinking.Specifications: Fits Hose Size: (inch) 3/4"inner diameter Max Hull Thickness: (inch) 1" Flange Diameter: (inch) 1-1/2" Installation...