2-Position SPST Push-Pull Switch w/Contoured Knob - OFF/ONSingle pole, single throw switch turns one circuit on and off. Heavy-duty, noncorrosive construction with moisture-repellent insulators. Brass case, stem, terminals and mounting hardware. All knobs are screw-on type.Features: Nominal voltage is 6-36V DC Rated for 10A...

3-Position SPDT Push-Pull Switch - OFF/ON1/ON1 & 2Single pole, double throw switch turns on position 1 or position 1 and 2.Features: Heavy-duty, noncorrosive construction with moisture-repellent insulators Brass case, stem, terminals and mounting hardware All knobs are screw-on type Nominal voltage is 6-36V DC....

2-Position Ignition Switch - OFF/ONMarine-grade battery ignition and start switch suitable for harsh environments on land or sea.Features: Coded tumbler lock, includes two keys Nominal voltage is 12V DC Rated for 10A at 12V DC #8-32 screw terminals Fits panels up to 1" thick...

3-Position Nylon Ignition Switch - OFF/Ignition/StartImpact and corrosion-resistant switch fits standard 7/8" diameter hole and includes PVC boot for added weather protection.Features: Coded tumbler lock for added secutiry, includes two keys Nominal voltage is 6-36V DC Rated for 15A ignition, 5A start #8-32 screw...

3-Position Sealed Nylon Ignition Switch - OFF/Ignition & Accessory/Ignition & StartSealed keyed switches with integral Deutsch connectors feature fully sealed contact areas with O-rings and ultrasonic welding to IP67 waterproof rating. High-impact plastic for corrosion resistance and tested to SAE J259 for ignition switches.Features:...

4-Position Sealed Nylon Ignition Switch - Accessory/OFF/Ignition & Accessory/StartSealed keyed switches with integral Deutsch connectors feature fully sealed contact areas with O-rings and ultrasonic welding to IP67 waterproof rating. High-impact plastic for corrosion resistance and tested to SAE J259 for ignition switches.Features: Nominal voltage...

3-Position Ignition Switch - OFF/Ignition-Accessory/StartMarine-grade battery ignition and start switch suitable for harsh environments on land or sea.Features: Coded tumbler lock, includes two keys Nominal voltage is 12V DC Rated for ignition: 10A at 12V DC and start: 5A at 12V DC #8-32 screw...

4-Position Brass Ignition Switch - Accessory/OFF/Ignition & Accessory/StartMarine-grade battery ignition and start switch suitable for harsh environments on land or sea.Features: Coded tumbler lock, includes two keys Nominal voltage is 12V DC Rated for accessory: 10A at 12V DC, ignition: 5A at 12V DC,...

Electronic Dimmer Switch w/Wire Leads - 7A @ 12V DCControls incandescent light intensity from dim to bright. Not meant for LED lights.Features: Nominal voltage is 12V DC Rated for 7A at 12V DC 2" 16 AWG wire lead terminals 7/16" mounting hole, fits panels...

DPDT Contura Switch - 1-Amber LED - ON/OFF/(ON)Double pole, double throw switch turns two of four circuits on at a time. Common applications include intermittent and maintained windshield wiper control. Contura switches are rated to IP66, high-pressure wash resistant. Recommended for replacements in waterproof...

DPDT Contura Switch - 2-Amber LEDs - ON/OFF/ONDouble pole, double throw switch turns two of four circuits on at a time. Common applications combining nav lights and anchor light with independent bulbs, maintained single windshield wiper control. Contura switches are rated to IP66, high-pressure...

DPDT Contura Switch - (ON)/OFF/(ON)Double pole, double throw switch turns two of four circuits on at a time. Common applications include powered hatch control. Contura switches are rated to IP66, high-pressure wash resistant. Recommended for replacements in waterproof electrical panels with rocker switches to...

DPST Contura Switch - 1-Amber LED - OFF/ONDouble pole, single throw switch turns two circuits on at the same time. Common applications include simultaneous control of anchor and running lights. Contura switches are rated to IP66, high-pressure wash resistant. Recommended for replacements in waterproof...

2-Position SPST Sealed Rocker Switch - 12V/24V - ON/OFFSingle pole, single throw switch turns one circuit on and off.Features: Nominal voltage is 12V/24V DC Rated for 20A at12V DC, 15A at 24V DC Two 1/4" blade terminals Snap fit into panels .093" - .187"...

Curved SPDT Mini Rocker Switch - 12V - ON/ONSingle pole, double throw switch turns one of two circuits on.Features: On/On position, can also be used as an On/Off by isolating terminal 3 Nominal voltage of 12V DC Universal application, rated for 10A at 12V...

DPDT Rocker Switch - 12V/24V - ON/OFF/ONDouble pole, double throw switch turns two of four circuits on at a time.Features: Nominal voltage is 12V DC Rated for 25A at 12V DC Six 1/4" blade terminals Snap-in mounting to fit panel hole 1.45" x .83"...

DPDT Rocker Switch - 12V/24V - (ON)/OFF/(ON)Double pole, double throw switch turns two of four circuits on at a time.Features: Nominal voltage is 12V DC Rated for 25A at 12V DC Six 1/4" blade terminals Snap-in mounting to fit panel hole 1.45" x .83"...

DPDT Toggle Switch - ON/OFF/ONDouble pole, double throw toggle switch turns two of four circuits on at the same time.Standard black nylon handleFeatures: Nominal voltage is 12V DC Rated for 25A at 12V DC Six 1/4" blade terminals Mounting stem 15/32" fits panels up...

DPDT Chrome Plated Toggle Switch - ON/OFF/ONDouble pole, double throw toggle switch turns two of four circuits on at a time. Common applications include combining nav lights and anchor light with shared bulbs.Features: Nominal voltage is 12V/24V DC Rated for 25A at 12V DC,...

DPDT Chrome Plated Toggle Switch - (ON)/OFF/(ON)Double pole, double throw toggle switch turns two of four circuits on at a time. A common application includes powered hatch control.Features: Nominal voltage is 12V/24V DC Rated for 25A at 12V DC, 15A at 24V DC Six...

Solenoid Valve - Green - 24VReplacement Solenoid Valve for use with Bennett's Hydraulic Power UnitSolenoid valves direct the flow of fluid to the actuators.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects...

12V Buzzer with Red LED Warning Light - Stainless SteelBuzzers are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to...

Connection Cable Bare End - 300 mmThis 300 mm (12") cable simply pushes onto the back of the push button switches and features 0.8 mm² / 18g cables for switch and backlight connections that comply with ISO/ABYC. Other end is stripped wire for easy...

Sensor Wire Extension with Deutsch Connector - 25'This sensor wire extension is 25 feet.Features:Deutsch connectorWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to...

One Box Indication Unit for Hydraulic SystemAn attractive and user-friendly, stand-alone helm control without the need for an external control unit. The functionality and “brains” of the control unit are engineered directly into a single, space-saving, and simple-to-install keypad. Reduce bow rise, plane faster,...

Hydraulic Tubing - 10'Hydraulic tubing with 10' coilWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to...

Relay Module - 12VA Relay Module reduces voltage drop in Trim Tab Systems with longer wire runs. With the older trim tab controls, RT1000 and RS1000, the Relay Module also functions as an Interrupter Relay and will prevent a fuse from blowing if Bow...

M80 Sport Tab System with One Box IndicationHydraulic trim tabs are known for power, precision, and durability. Get the most from your boat, no matter what the load, speed, or sea conditions. Using the helm control, you can adjust the tabs individually or in...

One Box Dual Station for Hydraulic SystemsAn attractive and user-friendly, stand-alone helm control without the need for an external control unit. The functionality and “brains” of the control unit are engineered directly into a single, space-saving, and simple-to-install keypad. Reduce bow rise, plane faster,...

275A Cont Motorized Dual Operation VSS (Voltage Sensitive Switch) - Deutsch ConnectorThese Voltage Sensitive Switches (VSS) automatically sense connected battery bank voltages and provide optimal, efficient charging of the second bank. The VSS allows for independent battery banks to be combined or isolated based...

Dealer Service KitExclusively offered to stocking dealers and repair yards, Bennett’s Dealer Service Kit is an affordable way to acquire the most common Bennett trim tab system replacement parts.What's Included? (QTY / 1) BOLTBLTADJ – BOLT Electric System (Not Including Tabs) (QTY / 1) BRC4000 – Rocker Switch for...

Waterproof Panel - 6 Switches - GreyFeatures: Compact panel size Sprayproof inline fuse holders with fuses included Waterproof power receptacles (16A) in five and three way models Waterproof to IP56 Switches rated at 20A DC LxWxH is 3.75'x4.25'x2.9' (95x107x75 mm) Panel supplied with label...

Push Button Switch - 24V Latching On/Off - Blue LEDPush-button Switches are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired...

Pro Installer 400A EZ-Mount On/Off Battery Switch - MC10As easy as 1, 2, 3, these revolutionary battery switches allow you to wire from the front. Never has installation been so easy and cabling so accessible. With their shared interconnection height, EZ-Mount battery switches "cluster"...

Pro Installer 400A EZ-Mount Double Pole Battery Switch - MC10An addition to our multi award winning Pro Installer EZ Mount range, this battery switch provides Double Pole On/Off functionality so that both positive and negative battery terminals can be isolated. Most commonly used on...

Pro Installer 400A Double Pole Battery Switch - MC10A powerful new generation battery switch with outstanding performance and features for both the installer and end user. Three mounting options: surface, rear panel, and front panel mounting, plus optimized cable access makes installation a breeze....

Pro Installer 400A EZ-Mount Battery Selector Switch (1-2-Both-Off)As easy as 1, 2, 3, these revolutionary battery switches allow you to wire from the front. Never has installation been so easy and cabling so accessible. With their shared interconnection height, EZ-Mount battery switches "cluster" directly...

Pro Installer 400A Selector Battery Switch - MC10Power requirements on boats have increased, and these 2 Selector switches offer high power capacity (400 amps continuous), the ability to easily fit doubled cables, and conform to the industry standard mounting footprint (Guest, Perko, Blue Sea)....

Pro Installer 400A EZ-Mount Dual Bank Control Battery Switch - MC10Another addition to our multi award winning Pro Installer EZ Mount range, the innovative Dual Bank Control switch is like 3 switches in one, House, Start, and Emergency Parallel. Offering easy intuitive control for...

Mini Battery Selector SwitchThe 701S is the most compact selector switch available on the market. While BEP recommends isolated battery systems as outlined with our distribution clusters, the 701S provides a simple economical way of separating two batteries. BEP Marine Battery Switch Test Procedures...

Panel-Mounted Battery Master SwitchPanel-mounted switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution. Compact, lightweight Removable key Countersunk recesses for surface mount application Standard 2-1/16" (52 mm) hole cut out (same as standard gauge hole) Inside: captive...

Panel-Mounted Battery Mini Selector SwitchPanel-mounted switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution. Compact, lightweight Countersunk recesses for surface mount application Standard 2-1/16" (52 mm) hole cut out (same as standard gauge hole) Inside: captive inserts...

Remote Operated Battery Switch, 275A Cont - Deutsch PlugThe MD range of battery switches allow you to install the battery switch very close to the battery, to remotely manage the increased electrical loads found on today's boats. This reduces cable lengths and sizes, providing...

Remote Operated Battery Switch w/Optical Sensor 500A 12/24VThe MD range of battery switches allow you to install the battery switch very close to the battery, to remotely manage the increased electrical loads found on today's boats. This reduces cable lengths and sizes, providing significant...

Remote On/Off Key Switch f/701-MD & 720-MDO Battery SwitchesThe remote On/Off key switch is used for the remote operation of the 701-MD and 720-MDO battery switches. It can be mounted stand alone or within the Contour Connect panel range.WARNING: This product can expose you...

Piezo Buzzer, 30mm 5-30V 85DBEspecially suitable for use with the new 701-MDCZ CZone optimized motorized battery switch, this piezo buzzer is also useful wherever a single tone alarm is required. 85 decibel output at 9 Volts Frequency 3.5KHz Voltage 5-30 Volts Power consumption 9mA...

Piezo Buzzer, 42mm 5-20V 97DBEspecially suitable for use with the new 701-MDCZ CZone optimized motorized battery switch, this piezo buzzer is also useful wherever a loud single tone alarm is required. 97 decibel output at 9 Volts Frequency 2.8 KHz Voltage 5-20 Volts (Suitable...

Horizontal Battery Distribution Cluster f/Single Engine w/Two Battery BanksThe 716-H-140A-DVSR is an ideal replacement for a battery selector switch. Just remove the selector switch and connect the existing wires to a 716 cluster, no extra wires are required for a fully automatic battery management...

Square Battery Distribution Cluster f/Single Engine w/Two Battery BanksThe 716-SQ-140A-DVSR is an ideal replacement for a battery selector switch. Just remove the selector switch and connect the existing wires to a 716 cluster, no extra wires are required for a fully automatic battery management...

500A 4 Stud Buss barPro Installer buss bars are designed for flexibility and scalability. The snap-out side skirts allow for additional cable entry, and radius ends improve cable routing options. it is easy to link other Pro Installer products to the buss bars because...