Macerator Pump - 24v w/Waste ValveMacerator pumps are the key to a number of important chores on a boat! The most important is to work when it is needed. While macerator pumps are generally used to empty holding tanks they can also be used...

Replacement Power Cord f/Current & Retired Fixed Mount VHF RadiosReplacement power cord for all current and retired model fixed mount VHF radios Specifications: Type: Chargers Box Dimensions: 1"H x 1"W x 4"L WT: 0.1 lbs

441 Backing Plate f/241 & 244 MountUse the Scotty Backing Plate to add structural support when attaching the Scotty 241L / 241 Combination Side / Deck Mount or the Scotty 244L / 244 Flush Deck Mount to thin-walled watercraft. Made with super tough, rugged...

GoTech™ 1.0 Universal Front Mount Outboard Hydraulic Steering SystemFor outboard single engine up to 115hp.Kit Contains: UP18 - Intermediate helm pump UC81-OBF - Front mount outboard cylinder OL 150 - Hydraulic oil - 2 litres KIT OB-GT-60 - Hose kit dia, 1/4" 6M(19.7") length Brochure (pdf)

Trolling Motor BracketTrolling Motor Bracket specifically designed for the Dragonfly CPT-DV and CPT-DVS transom mount transducers. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 6"W x 8"L WT: 0.2 lbs UPC: 723193796177

Masthead Light f/Sail or Power Less Than 20M - 12VDC - Black Base Mount/White LightFeatures: Black Plastic with Stainless Steel Mounting Bracket Bulb Included Certified for use on Sail or Power Driven Vessels Under 20 Meters (65.6 ft.) in Length. 3 Miles Visibility 12VDC...

VHF 8' 6225-R Phase III Antenna - No CableReduced Length Version Embark upon your next voyage with the most technologically advanced antenna we've ever created...Construction Goes High-TechPhase III antennas embody the ultimate in antenna design, construction and performance. We intend them for discerning, tech-conscious...

Masthead Cable & BaseRaymarine's 30M Masthead Cable and Base for Raymarine ST60 and i70.

RayNet Cable Pullers - 5 PackRaymarine's Cable Pullers securely attach to the twist-lock plug on RayNet networking cables and provide a convenient, center-mounted attachment point for your pull string. The cable puller protects the connector's internal pins from damage, acts as a fairing to...

Premium Power Braid Downrigger Line - 200ft of 200lb TestScotty Premium 200 lb. test Power Braid is our latest high tech, low drag, black microfilament braided downrigger line. This custom manufactured braid offers the ultimate in strength, consistency and durability. The use of braided...

Premium Power Braid Downrigger Line - 400ft of 200lb TestScotty Premium 200 lb. test Power Braid is our latest high tech, low drag, black microfilament braided downrigger line. This custom manufactured braid offers the ultimate in strength, consistency and durability. The use of braided...

327 Fender Ring - 2-PackUse these Scotty 327 Fender Rings to quickly attach lines and accessories to your Scotty rod holder mounts. Easy to insert and remove.Features: 2-Pack Inside Diameter of Ring: 7/8" Mounting Bracket not included

Re-Arm Kit for M-16 Manual Inflatable Life Jackets - 16 GramThe M-16 re-arm kit is made for use with the M-16 Manual Inflatable PFD Belt Pack (Model #1309)In the Box: 16 Gram CO2 Cylinder with 3/8" thread Halkey-Roberts Green Indicator Tab Re-Arming Instructions Specifications:...

Hammer Head Rod Butt Cushion - BlackFeatures: Attach No. 425 Hammer Head to the end of your fishing rod for ultimate comfort when fighting that fish More comfortable and easier to use than most fighting belts, with a universal rod butt tube allowing for...

Handset Extension Cable for Ray60/70 - 5MRaymarine's 5M Handset Extension Cable is used to extend the handset that is included with the Ray60 and Ray70 VHF Radios. Specifications: Type: Cables Box Dimensions: 2"H x 10"W x 10"L WT: 1.1 lbs UPC: 723193788561

Handset Extension Cable f/Ray60/70 - 10MRaymarine's 10M cable is used to extend the handset that is included with Raymarine's Ray60 and Ray70 VHF Radios. Specifications: Type: Cables Box Dimensions: 2"H x 9"W x 10"L WT: 1.55 lbs UPC: 723193788547

Raynet to RJ45 Female Adapter 100mmThis adapter has a RayNet Female connector at one end, and a RJ45 Female Gland connector at the other end. The Gland makes the RJ45 Female socket watertight. A typical use for this cable would be to convert a...

Stoppers for Line Releases & Auto Stop - 6 Pack6 molded nylon stoppers for the auto stop and for locating line releases.6 total - 3 black and 3 yellow

Snap Terminal Kit1154 Terminal KitIncludes: 1 Swivel hook 1 Stainless steel thimble 1 Soft stop bumper 3 Heavy Duty Brass Connector Sleeves 3 Brass Connector Sleeves WARNING: This product can expose you to chemicals including LEAD which is known to the State of California...

Double Line Connector Sleeves - 10 Pack10 double black brass sleeves for joining wire or heavy monofilament line.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm....

Wire Joining Connector Sleeves - 10 Pack10 black brass sleeves for joining wire line or for locating line releases. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm....

12CI Pumpset - 12VDCThe 12CI Pumpset, 12 VDC is intended for use with Si-Tex autopilot systems.

AT-3 Small White Nylon Tie Mount - Qty. 500The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull...

AT-3B Small Black Nylon Wire Tie Mount - Qty. 500The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". Average...

AT-5 Large White Nylon Tie Mount - Qty. 500The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength...

AT-5B Large Black Nylon Wire Tie Mount - Qty. 500The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull...

APT-150-01 - Aluminum PowerTower® Radar Mount - 6" Aft LeaningThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled...

APT-GPS-01 PowerTower® Center Mounted Bar f/GPS/VHF/Navtex AntennaMounts GPS, VHF and Navtex antennas above the radar for maximum visibility and performance.  Works with standard 1” x 14 TPI thread.Compatible with:Scanstrut aft leaning PowerTower® radar mountsFeatures: Designed for the installation of GPS antenna and ‘Whip’ type...

APT-LB-01 PowerTower® Center Mounted Light BarInstalls navigation lights above the antenna for maximum visibility and performance.Compatible with:Scanstrut aft leaning PowerTower® radar mountsFeatures: All mounting holes predrilled for easy retrofit installation, attach using mounting bolts, no extra fastenings required Cables run internally via a watertight...

SSM-64A VOX HeadsetCompatible Devices: HX370 HX471 HX500 HX600 HX750 HX751 HX HX850 HX Specifications: Type: Microphones Box Dimensions: 3"H x 6"W x 8"L WT: 0.3 lbs UPC: 788026144259

Talon 3-Piece Jackplate BracketFeatures: Design allows for better fit with Evinrude G2 outboard motor Compatible with jack plate setbacks down to 4" Compatible with most jack plate designs Anodized aluminum finish

Talon Quick Release Disconnect PlugThis heavy-duty, waterproof connector features an all-inclusive screw-lock design.

Pro Rotary PolisherProfessional GradeThe Shurhold Pro Rotary Polisher is a tool built for the professional detailer, shops an dyards. This super powerful true Rotary Polisher cuts, Polishes and Buffs to bring out a mirror like finish in even the dullest surfaces.Features: 7" Quick Change...

Rudder AnodeMaterial: AluminumOuter Diameter: 2.84"Height: 0.43"Weight: 0.34lbs Full size and weight Rudder Each includes Stainless Steel hex nut and socket cap screw The captive hex nut is a great feature for underwater installations Specifications: Material: Aluminum Box Dimensions: 2"H x 3"W x 3"L WT:...

Rudder AnodeMaterial: AluminumOuter Diameter: 3.63"Height: 0.52"Weight: 0.61lbs Full size and weight Rudder Each includes Stainless Steel hex nut and socket cap screw The captive hex nut is a great feature for underwater installations Specifications: Material: Aluminum Box Dimensions: 2"H x 4"W x 4"L WT:...

Rudder AnodeMaterial: AluminumOuter Diameter: 5"Height: 0.89"Weight: 1.73lbs Full size and weight Rudder Each includes Stainless Steel hex nut and socket cap screw The captive hex nut is a great feature for underwater installations Specifications: Material: Aluminum Box Dimensions: 3"H x 5"W x 5"L WT:...

Rudder AnodeMaterial: MagnesiumOuter Diameter: 5"Height: 0.60"Weight: 0.78lbs Full size and weight Rudder Each includes Stainless Steel hex nut and socket cap screw The captive hex nut is a great feature for underwater installations Specifications: Material: Magnesium Box Dimensions: 3"H x 5"W x 5"L WT:...

Fender Cover for F-3 Fender - BlackFender covers should be as tough as the fenders they protect.  That was our criteria used in developing the Elite Fender Cover series. Polyform uses a premium-grade polyester yarn that is resistant to abrasion and UV exposure.  Additionally, it...

Shaft AnodeMaterial: ZincOuter Diameter: 2.14"Inner Diameter: 0.87"Height: 2.02"Weight: 0.97lbsHoles: 2 Specifications: Material: Zinc Box Dimensions: 2"H x 2"W x 2"L WT: 1 lbs UPC: 8059617812188 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Shaft AnodeMaterial: ZincOuter Diameter: 2.14"Inner Diameter: 1"Height: 2.02"Weight: 0.88lbsHoles: 2 Specifications: Material: Zinc Box Dimensions: 2"H x 2"W x 2"L WT: 0.9 lbs UPC: 8059617812249 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Shaft AnodeMaterial: ZincOuter Diameter: 2.58"Inner Diameter: 1.50"Height: 2.62"Weight: 1.37lbsHoles: 4 Specifications: Material: Zinc Box Dimensions: 2"H x 2"W x 3"L WT: 1.4 lbs UPC: 8059617812423 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Shaft AnodeMaterial: ZincOuter Diameter: 3.20"Inner Diameter: 1.75"Height: 3.06"Weight: 2.56lbsHoles: 4 Specifications: Material: Zinc Box Dimensions: 3"H x 3"W x 3"L WT: 2.7 lbs UPC: 8059617812454 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Shaft AnodeMaterial: ZincOuter Diameter: 3.02"Inner Diameter: 2"Height: 3.25"Weight: 2.42lbsHoles: 4 Specifications: Material: Zinc Box Dimensions: 3"H x 3"W x 3"L WT: 2.5 lbs UPC: 8059617812485 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Shaft AnodeMaterial: AluminumOuter Diameter: 3.02"Inner Diameter: 2"Height: 3.25"Weight: 0.95lbsHoles: 4 Specifications: Material: Aluminum Box Dimensions: 3"H x 3"W x 3"L WT: 1.1 lbs UPC: 8059617812492 Quick Guide (pdf)Owner's Manual (pdf)

Shaft AnodeMaterial: MagnesiumOuter Diameter: 2.27"Inner Diameter: 1.25"Height: 2.52"Weight: 0.28lbsHoles: 2 Specifications: Material: Magnesium Box Dimensions: 2"H x 2"W x 3"L WT: 0.3 lbs UPC: 8059617812386 Quick Guide (pdf)Owner's Manual (pdf)

Shaft AnodeMaterial: MagnesiumOuter Diameter: 2.58"Inner Diameter: 1.50"Height: 2.62"Weight: 0.35lbsHoles: 4 Specifications: Material: Magnesium Box Dimensions: 2"H x 3"W x 3"L WT: 0.4 lbs UPC: 8059617812447 Quick Guide (pdf)Owner's Manual (pdf)

Trim Tab AnodeMaterial: ZincOuter Diameter: 3.54"Length:4.13"Weight: 1.06lbs Specifications: Material: Zinc Box Dimensions: 3"H x 4"W x 5"L WT: 1 lbs UPC: 8033837064190 Quick Guide (pdf)Owner's Manual (pdf)

Trim Tab AnodeSkeg For Engines - Yamaha 200-250Material: ZincTab Height: 2.76"Outer Diameter: 3.94"Weight: 1.50lbs Specifications: Material: Zinc Box Dimensions: 4"H x 4"W x 6"L WT: 1.5 lbs UPC: 8033837065296 Quick Guide (pdf)Owner's Manual (pdf)

Transom Bar AnodeBar For Engines - Yamaha Material: ZincLength: 7.99"Height: 1.97"Width: 1.77"Weight: 1.99lbs Specifications: Material: Zinc Box Dimensions: 2"H x 3"W x 8"L WT: 2 lbs UPC: 8033837065173 Quick Guide (pdf)Owner's Manual (pdf)

Transom Bar AnodeBar For Engines - Yamaha Material: AluminumLength: 7.99"Height: 1.97"Width: 1.77"Weight: 0.78lbs Specifications: Material: Aluminum Box Dimensions: 2"H x 3"W x 8"L WT: 0.75 lbs UPC: 8059617815660 Quick Guide (pdf)Owner's Manual (pdf)