DO 550 Rope Clutch - DoubleThe Barton D0 550 clutch is designed for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine environment. Molded parts are from high-grade plastics that are strong, light, and impact-resistant. Cams and bases are...

Yanmar Pulley Kit for 4JH, 4JHE, -TE, -HTE, -DTEAltMount® Serpentine Pulley Conversion Kit for Yanmar Diesel EnginesYanmar Engines Covered: 4JH, 4JHE, -TE, -HTE, -DTEKit Includes:  Three Ten-Groove (J10) Pulleys Two J10 47″ Circumference Serpentine Belts (one spare) Mounting Hardware Note: If you specify an AT-200A...

Boomstrut - Black for Boats Up To 20'Boomstrut 44011 is designed for boats up to 6m (20ft) in length with a maximum boom tip weight of 6.3kg (14 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom...

Boomstrut - Silver/White for Boats 20-25'oomstrut 44020 is designed for boats 6m-7.5m (20ft -25ft) in length with a maximum boom tip weight of 9.5kg (21 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to keep the...

Boomstrut - Black for Boats 20-25'Boomstrut 44021 is designed for boats 6m-7.5m (20ft -25ft) in length with a maximum boom tip weight of 9.5kg (21 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to keep the...

Boomstrut - Silver/White for Boats 25-30'Boomstrut 44030 is designed for boats 7.5m – 9m (25ft – 30ft) in length with a maximum boom tip weight of 15kg (33 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom...

Boomstrut - Black for Boats 25-30'Boomstrut 44031 is designed for boats 7.5m – 9m (25ft – 30ft) in length with a maximum boom tip weight of 15kg (33 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom...

Boomstrut - Silver/White for Boats 30-35'Boomstrut 44035 is designed for boats 9m – 10.5m (30ft- 35ft) in length with a maximum boom tip weight of 19kg (42 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to...

Boomstrut - Black for Boats 30-35'Boomstrut 44036 is designed for boats 9m – 10.5m (30ft- 35ft) in length with a maximum boom tip weight of 19kg (42 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to...

High Load Eye 6mm BoreAvailable in six sizes. Manufactured in marine-grade aluminum with a hard anodized finish. These lightweight high-load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, and ast base tidies to stanchion lead eyes. The...

Continuous Line FurlerDesigned for optimum performance in the most demanding of conditions, the HBT1 hybrid-bearing technology combines high specification, solid-state, and Torlon ball bearings, which ensures the furling wheel remains balanced and spins freely, even under the highest loads.With a safe working load of...

32mm End Stop & Becket Genoa Car TrackBarton Marine's sleek range of Genoa is designed to run on 32mm (1 ¼”) T Track. All are manufactured from high-grade aluminum with our unique Spectro anodized finish for superior protection in marine environments. A black anodized...

Laser Replica 15:1 Boom Vang Assembly The Barton boom vang assembly gives all the advantages of systems costing twice the price. 15:1 purchase is achieved through clever design of the base plate, fitted with the unique Barton swivelling triple cam block. It is simple to fit...

Large Snatch Block for Yachts Up to 40' (12.2M) - Stainless Steel SnapBarton Snatch Blocks give the crew the option to locate the block anywhere on deck using the stainless steel snap shackle, then locate a rope into the sheave without the need to...

Aluminium 8" Winch HandleThe aluminium winch handles are designed to fit International Star sockets found in all makes of winch and standard deck filler caps.Light-duty and inexpensive, they come in two popular sizes. Each handle features a silver anodised profiled bar with an integral...

Aluminium 10" Winch HandleThe aluminium winch handles are designed to fit International Star sockets found in all makes of winch and standard deck filler caps.Light-duty and inexpensive, they come in two popular sizes. Each handle features a silver anodised profiled bar with an integral...

Quick Cleat - On a Patch for Inflatables - 1/4"The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. The perfect solution for securing ropes onto inflatables, featuring a Quick Cleat mounted onto...

Quick Cleat - Stainless Steel - 3/8"The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots.  The heavy-duty version is made of 316-grade Stainless Steel and is suited for marina use, larger...

DO 550 Rope Clutch - Handle Replacement handle for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications: Color: Black Box Dimensions: 2"H x 3"W x 6"L WT: 0.1 lbs UPC: 5035088815456 Brochure (pdf)

DO 550 Rope Clutch - Cam Replacement cam for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications: Color: Silver Box Dimensions: 1"H x 2"W x 5"L WT: 0.1 lbs UPC: 5035088815463 Brochure (pdf)

DO 550 Rope Clutch - Base Plate Replacement base plate for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications: Color: Silver Box Dimensions: 1"H x 3"W x 7"L WT: 0.1 lbs UPC: 5035088815470 Brochure (pdf)

DO 550 Rope Clutch - Spring Assembly   Replacement spring assembly for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications: Color: Silver Box Dimensions: 1"H x 4"W x 6"L WT: 0.01 lbs UPC: 5035088815494 Brochure (pdf)

Genoa Slide with Loop for 32mm TrackHave a heavy-duty stainless steel attachment loop, through-bolted and riveted for extra strength. These units will accept most Barton blocks. A popular range of Genoa cars and sliders designed to run on a 32mm (11/4") 'T' track. All...

64mm Diameter Ball Bearing Rope SheaveA replacement all-purpose rope sheave. Used throughout the complete Barton block range. Molded from UV-resistant acetal resin, the Barton sheave is made to survive the harsh marine environment. The unique, super-low friction ball race system features Delrin balls running...

58mm Diameter Ball Bearing Rope Sheave A replacement all-purpose rope sheave. Used throughout the complete Barton block range.  Molded from UV-resistant acetal resin, the Barton sheave is made to survive the harsh marine environment. The unique, super-low friction ball race system features Delrin balls running...

Deck Organizer - Size 1 - 6 Sheave Designed for use when diverting mast base control lines and halyards back to the cockpit.  Allowing the crew to sail from from the security of the cockpit.Suitable for boats up to 32' (9.75 M) with halyard size...

Deck Organizer - Size 2 - 2 Sheave - Black Designed for use when diverting mast base control lines and halyards back to the cockpit.  Allowing the crew to sail from the security of the cockpit.Suitable for boats up to 32' (9.75 M) with halyard...

35mm Diameter Plain Bearing SheaveA replacement all-purpose rope sheave.  Used throughout the complete Barton block range.  Molded from UV-resistant acetal resin, the Barton sheave is made to survive the harsh marine environment.   The unique, super-low friction ball race system runs on a large...

Single Fixed EyePlain Bearing BlocksBarton plain bearing blocks have a precision molded acetal sheave running on a large diameter brass bearing, ensuring free running under the highest of loads.Specifications Sheave size: 20mm x 8mm Max rope diameter: 5mm Safe working load: 275kg / 606lbs...

Drain Plug - Black 15mm (19/32")This screw-type black drain bung is still among the best available. Supplied with rubber `O' ring for a watertight seal.Specifications: Length: 15mm (19/32") weight: 7gm(.23oz)

Mast Base Organizer - 4 BlockThe Barton Mast Base Organiser is finished in our unique 'Spectro' grey anodizing for a long-lasting finish.It accepts up to four double tang blocks mounted on individual stainless steel swivel posts but with three deck fixing points.The unit is...

Furling Drum - 3.74"Drums are molded from glass fiber reinforced nylon with stainless steel swivel and ball bearing assemblies. Furling drums will accept lines up to 4mm in diameter.Features:Holds up to 8.5M of LineSpecifications: Drum Diameter: 95mm Sail Area: 100 square foot Break Load:...

Kevlar Cam Cleat MaxiManufactured from a composite Kevlar/Zytal material. This advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins; 'K' cams are solid, lightweight, and have excellent wear resistance. A progressive tooth design ensures maximum holding power on all types of...

Shroud Cleat with EyeBarton Marine's Shroud Plain Cleat with Eye is a multipurpose cleat that conveniently clamps onto shroud wire (maximum diameter - 8mm (5/16") securely and without causing damage.Features: Wide eye opening for stowage of shackles Clamps onto shroud wire without causing damage...

Line Tamer - White PairA line storage device designed to keep cockpits free from unused lines and halyards.  A smooth profile ensures no snagging as crew members brush past. Features:Suitable for rope coils of up to 7.87" (20) cm diameter*Sold as a Pair Specifications: Type:...

Line Tamer - Grey PairA line storage device designed to keep cockpits free from unused lines and halyards.  A smooth profile ensures no snagging as crew members brush past. Features:Suitable for rope coils of up to 7.87" (20) cm diameter*Sold as a Pair Specifications: Type:...

165mm Sliding Cleat - Fits 25mm T TrackA cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - is simply to remove a Genoa track end stop, slide on the cleat and lock it in the desired...

Extra Large Wincher PairThe Barton Wincher is a specially designed rubber molding that converts your standard winch into a self-tailing winch.  This tried and tested design has been a firm favorite with Sailors for many years.The Wincher works by gripping the rope when the...

Large Wincher PairThe Barton Wincher is a specially designed rubber molding that converts your standard winch into a self-tailing winch.  This tried and tested design has been a firm favorite with Sailors for many years.The Wincher works by gripping the rope when the drum...

High Load Eye 12mm BoreErgonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed to keep friction as low as possible. The range has amazing strength-to-weight ratios, making...

High Load Eye 16mm BoreErgonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed to keep friction as low as possible. The range has amazing strength-to-weight ratios, making...

High Load Eye 22mm BoreErgonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed to keep friction as low as possible. The range has amazing strength-to-weight ratios, making...

Screw Inspection Cover - 6" (103mm) - WhiteThese covers are manufactured from high-impact polycarbonate and feature an easy start thread and a built-in ‘O’ ring seal. Quick Guide (pdf)

Alu Foam Soft Grip Tiller Extension - 700mmThe aluminum Soft Grip Tiller Extension is a specially designed textured grip for secure handling and comfort during prolonged use.Features: Manufactured from anodized aluminum Soft butt-end option Quick Guide (pdf)

Alu Foam Soft Grip Tiller Extension - 800mmThe aluminum Soft Grip Tiller Extension is a specially designed textured grip for secure handling and comfort during prolonged use.Features: Manufactured from anodized aluminum Soft butt-end option Quick Guide (pdf)

Alu Foam Soft Grip Tiller Extension - 900mmThe aluminum Soft Grip Tiller Extension is a specially designed textured grip for secure handling and comfort during prolonged use.Features: Manufactured from anodized aluminum Soft butt-end option Quick Guide (pdf)

Carbon Fiber Tiller Extension - 1MFeatures the latest in uni-directional 16mm carbon fiber tube which incorporates an additional pull wound spiral layer for optimum strength, making it stronger than conventional carbon fiber tube, and with our custom-designed foam grip handle to reduce fatigue during...

Size 0 20mm Plain Bearing Pulley Block CheekThe Barton Size 0 Plain bearing block has 20mm (3/4″) sheaves and is also available in ball bearing sheaves. They are designed for high strength and performance but lightweight with the range starting at only 13gms (0.5oz).Suitable...

Active External VHF Speaker - WhiteThe BAR-VA-1W (White) and BAR-VA-1B (Black) Active VHF extension speakers provide the loudest and clearest amplification of your VHF radio. A built-in 10W DSP amplifier actively removes sound that falls outside of the human vocal range to help you...

Active External VHF Speaker - BlackThe BAR-VA-1W (White) and BAR-VA-1B (Black) Active VHF extension speakers provide the loudest and clearest amplification of your VHF radio. A built-in 10W DSP amplifier actively removes sound that falls outside of the human vocal range to help you...