Buss Bar with Cover - 6 TerminalsThis bus bar is designed for positive or negative DC distribution or collection of AC neutral or safety ground circuits. Constructed of corrosion-resistant tin-plated Copper and ABS with a polycarbonate cover.Features: Includes two 5/16"-18 stainless steel stud terminals...

Cabin Reading Light with Touch Dimmer & USB PortLED Cabin/Reading Light with built-in, touch-controlled on/dim/off switch and USB port. This light features an adjustable direct beam reading light, as well as ambient light for the cabin. Warm white LED light with blue accented dimmer...

Stainless Cast Steel Flush Mount Rod Holder with Cap - 30° The unique design of the cast stainless mounting flange allows the use of a gasket to reduce leakage that is common on other cast rod holders. This Flush Mount Rod Holder with Cap is...

Chrome Plastic LED Dome Light 4" Day/Night - Clear/Red BulbThese vibration resistant LED Day/Night Dome Lights are prewired with on/off/on rocker switch and feature two separate light circuits. One circuit uses a clear bulb and the other circuit uses a red night vision bulb....

Combination Bow LightCombination Bow Light is for replacement of existing lighting (not for new construction). Constructed of die cast chrome zinc. Lens can be reversed for under mounting. Installs with two #10 FH fasteners (not included). Recommended for fresh water use. These navigation lights...

Cupboard Bolt Surface mounted to the front of a cupboard door, these Cupboard Bolts are used to secure cabinet doors while underway. Corrosion resistant chrome plated extruded brass construction. Installs easily with six #6 FH fasteners (not included).WARNING: This product can expose you to chemicals...

Door Hinge - 1-1/2" x 3" - Investment Cast 316 Stainless SteelThese Door Hinges are constructed of corrosion-resistant investment-cast 316 stainless steel. Installs with six #10 FH fasteners (not included).Specifications:Fastener: #10 FH Specifications: Material: Stainless Steel Box Dimensions: 0"H x 2"W x 3"L WT:...

Door Stop & Catch - Brass - 2" The Sea-Dog® Door Stop and Catch holds the door securely against the rubber stop, effectively reducing rattling common with most door hooks. The spring-loaded latch allows for quick and easy release. Constructed of sand cast brass with...

Double Braided Nylon Dock Line - 1/2" x 25' - WhiteFeatures:  Double Braided Nylon Dock Lines 100% premium double braided nylon Professionally spliced soft eye at one end Yacht whipped at the bitter end and splice point WARNING: This product can expose you to...

Double Braided Nylon Dock Line - 1/2" x 30' - BlackFeatures:  Double Braided Nylon Dock Lines 100% premium double braided nylon Professionally spliced soft eye at one end Yacht whipped at the bitter end and splice point WARNING: This product can expose you to...

Double Braided Nylon Dock Line - 5/8" x 20' - Black Features:  Double Braided Nylon Dock Lines 100% premium double braided nylon Professionally spliced soft eye at one end Yacht whipped at the bitter end and splice point WARNING: This product can expose you to...

Double Braided Nylon Dock Line - 5/8" x 50' - WhiteFeatures:  Double Braided Nylon Dock Lines 100% premium double braided nylon Professionally spliced soft eye at one end Yacht whipped at the bitter end and splice point WARNING: This product can expose you to...

Double USB & Power Socket Panel This injection molded nylon power socket panel accommodates both USB connectors as well as standard power sockets. The dual USB power socket charges two devices simultaneously. Input 12V–24VDC. Single output DC 5V/2.4A. Total output is 4.8A with the load...

Dual Buss Bar with Cover - 12 TerminalsThis dual bus bar is designed for DC positive or negative distribution on one block or AC neutral and safety ground collection on one block. Constructed of corrosion-resistant tin-plated Copper and ABS with a polycarbonate cover.Features: Includes...

Dual USB Power Socket This USB power socket charges two devices simultaneously. Input 12V–24V. Total output DC 5V/4.8A with the load being split between the two sides as needed. Enough power to charge iPhones, iPads and most other devices. Blue LED illumination. Protective dust cap...

Fender HookThis fender hook can be used for quick and easy placement of fenders. Designed to be installed on the gunwale for use with up to 3/8" lineFeatures: The spring-loaded hook keeps the line captive against the surface Constructed of corrosion-resistant investment-cast 316 stainless...

Fillet Table Only - 20" Features: UV stabilized high-density polypropylene Solid one-piece construction for long life and easy maintenance Medium, 20" wide by 12-5/8" deep Easily accessible knife and pliers holders Knives and pliers not included DOES NOT INCLUDE MOUNTING HARDWARE WARNING: This product can...

Flush Gas Lift Mount Flush Gas Lift Mounts are constructed of stamped 304 stainless steel. Used for mounting gas filled lift springs. Installs with three #10 RH fasteners (not included). 10 mm ball.WARNING: This product can expose you to chemicals which are known to the...

Flush Mount Flagpole Socket - 25° - 1-1/4" ID - 316 Stainless SteelThe 25° Flush Mount Flagpole Socket accepts flagpoles up to 1-1/4” in diameter. Maximum speed 10 MPH. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with three #12 FH fasteners...

Flush Mount Rod Holder - Black Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle. Accommodates rods up to 1-5/8”. Installs with three #12 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to...

Flush Mount Rod Holder - WhiteFlush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle. Accommodates rods up to 1-5/8”. Installs with three #12 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the...

Flush Mount Rod Holder with Stainless Top The look you want at an economical price! This Flush Mount Rod Holder with Stainless Top is constructed of UV resistant injection molded ABS with a stainless steel top cap. Features a 30° angle. Accommodates rods up to...

Fold Down All Around Light - 26" Fold Down 360° All Around Lights folds down easily for storage and comes with a white translucent lens. For replacement of existing lighting (not for new construction). Constructed of injection molded nylon and aluminum. Installs with four #10...

Folding Pole Storage Bracket These convenient pole storage brackets fold away when not in use. Constructed of corrosion resistant 304 stainless brackets with UV stabilized injection molded nylon hooks. Accepts poles up to 1-1/4” in diameter. Each bracket installs with four #12 FH fasteners (not...

Folding Step - Formed 304 Stainless SteelThe ultimate step at a very competitive price! This Folding Step can be locked in a rattle-free, upright position when not in use. The unique design features a sawtooth, edged step to provide secure footing when working on...

Folding Stud Mount Cleat - 4-1/2" - Investment Cast 316 Stainless SteelThese highly polished Folding Stud Mount Cleats lock down when not in use and flip back up when it’s time to tie off. Surface mount means there are no drain tubes or receptacles...

Front Mount Power SocketThis SAE-type polarized electrical connector is a two-prong power socket connector set. Great for solar panel connections and maintaining battery charge. Drill a 3/4” hole and install with two #10 RH screws (not included).Features:14-gauge duplex wireSpecifications: Length: 5 in. Volts: 12-24...

Galvanized Coupler Lock Pin - 1/4" Square coupler pins add an additional level of security preventing accidental uncoupling while in transit to better protect your trailer. Electrogalvanized steel construction for corrosion resistance. The snap lock bale is spring tensioned for stronger holding power. Fits most...

Galvanized Coupler Lock Pin - 5/16" Square coupler pins add an additional level of security preventing accidental uncoupling while in transit to better protect your trailer. Electrogalvanized steel construction for corrosion resistance. The snap lock bale is spring tensioned for stronger holding power. Fits most...

Gas Filled Lift Spring - 10" - 40# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog®...

Gas Filled Lift Spring - 15" - 30# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog®...

Gas Filled Lift Spring - 20" - 60# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog®...

Gas Tank Strap - Nylon Webbing/304 Stainless Steel - 72"This Gas Tank Strap is for use in securing a portable gas tank. Includes: 1” x 6’ webbing strap with buckle, two footman's loops, and four #10 FH fasteners. Constructed of nylon webbing with corrosion-resistant...

Hand Rail Tee 316 Stainless Steel 90° - 7/8"These Hand Rail Tee fittings create directionality in hand rail applications. Includes set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316...

Heavy Duty Battery Box Strap - 48" Heavy Duty Battery Box Strap includes a woven polypropylene strap, stainless steel buckle, two chrome plated brass brackets, and four #8 FH fasteners. WARNING: This product can expose you to chemicals which are known to the State of...

Illuminating Contura® Rocker Switch - Stamped Brass/Injection Molded Nylon/PolycarbonateThese Illuminated Contura® Rocker Switches are vibration, shock, thermoshock, moisture, and salt spray resistant. Temperature range from -40°C to +85°C. UL1500 / ISO8846 ignition protection for marine products. Displays a red light when in the ON...

Kayak Deck Bungee KitThis kit comes with everything needed to add deck bungee to any kayak. Just set the pattern, drill the holes, and tie the related knots, and that's it.Features:Proudly constructed in the USA of injection molded nylon and polypropyleneKit Includes:  11’ of...

Kayak Hatch Cover - 8" - VCP RoundThis 8" Round Hatch Cover is great as a replacement for lost or damaged lids. This performance hatch features our unique two-part construction for maximum protection. Designed to float when dropped in the water and is easy...

Kayak Recreational Angled Footbrace with Rudder ControlThis Sea-Dog Angled Footbrace with a rudder control slide is perfect for rudder and motor control steering. The footbrace is designed for sit-on-top kayaks or canoes with a raised seat, providing ergonomic and comfortable foot placement. The wider,...

Ladder Lock - Chrome BrassThese highly polished Ladder Locks are commonly used with wooden step ladders. Ladder slips into tapered locks and becomes secure as it is lowered in to place. Constructed of cast brass with a chrome plated finish. Installs with eight #10...

Ladder Lock - BrassThese highly polished Ladder Locks are commonly used with wooden step ladders. Ladder slips into tapered locks and becomes secure as it is lowered in to place. Constructed of cast brass with a plain finish. Installs with eight #10 FH fasteners...

Leather Mooring Line Chafe Kit - 1/2" Mooring line chafe kits include: Waxed twine, heavy duty needle and (2) 10” pieces of leather pre-stamped for sewing. Used to reduce chafe and extend the life of mooring lines. Natural leather - color may vary. WARNING: This...

Leather Mooring Line Chafe Kit - 3/4" Mooring line chafe kits include: Waxed twine, heavy duty needle and (2) 10” pieces of leather pre-stamped for sewing. Used to reduce chafe and extend the life of mooring lines. Natural leather - color may vary.WARNING: This product...

Leather Mooring Line Chafe Kit - 3/8" & 7/16" Mooring line chafe kits include: Waxed twine, heavy duty needle and (2) 10” pieces of leather pre-stamped for sewing. Used to reduce chafe and extend the life of mooring lines. Natural leather - color may vary....

Leather Mooring Line Chafe Kit - 5/8" Mooring line chafe kits include: Waxed twine, heavy duty needle and (2) 10” pieces of leather pre-stamped for sewing. Used to reduce chafe and extend the life of mooring lines. Natural leather - color may vary.WARNING: This product...

LED Cabin/Reading Light This LED Cabin/Reading Light features an adjustable light angle for directed lighting. G4 LED 2W (warm white) bulb included. Prewired with integral on/off rocker switch. 150 lumens. Installs with four #6 FH fasteners (included). IP55 rating.WARNING: This product can expose you to...

LED Cabin/Reading Light with Touch Dimmer LED Cabin/Reading Light with built-in, touch controlled on/dim/off switch. This light provides a direct beam reading light, as well as ambient light for the cabin. High quality aluminum construction with an adjustable light angle and a warm white, 3000K...

LED Cockpit Spreader Light 1440 Lumens - BlackThese marine grade LED Cockpit Spreader Lights feature six 3W high intensity Epistar LEDs that produce 1440 lumens. The wide beam polycarbonate lens provides ample illumination for sail trim or deck work. Constructed of a powder coated...

LED Courtesy Light - White LED Courtesy Lights utilizes three bright LEDs that draw very low amperage and have a very long service life. Stamped 304 stainless steel face plate hides the mounting screws to give this light a sleek, modern look. 55 lumens. Low...

LED Flex Neck Day/Night Light with USB Socket - Red LightLED Flex-Neck Day/Night Light with USB is great for chart lighting or can be used as a reading, cabin, or berth light. Features 21 white LEDs and 3 red LEDs for night vision with...